COVID-19 Lockdown | We will be operating as normally as possible during the national lockdown. If you need any further help or assistance please call us on 020 7064 9660
Media Spotlight: WP300 Wall Print 300 High Grab

Media Spotlight: WP300 Wall Print 300 High Grab

Wall Print 300 is a top-quality smooth 100mic matt white PVC-faced printable medium, coated with a high-tack grey adhesive and laminated with a 140gsm, PE-coated silicon kraft paper. Its main application is as a digitally-printable wall covering for spaces where high contact adhesive is necessary, but it can also be used for outdoor signage and similar functions. One of its main advantages is that, because of its very high grab and opacity, it can be applied to walls which have low contamination, and has virtually no ‘see through’ once applied.

In our continuing Media Spotlight series, this week we’re turning our attention to Wall Print 300, an exceptional quality digitally-printable wall covering.

Wall Print 300 is a top-quality smooth 100mic matt white PVC-faced printable medium, coated with a high-tack grey adhesive and laminated with a 140gsm, PE-coated silicon kraft paper. Its main application is as a digitally-printable wall covering for spaces where high contact adhesive is necessary, but it can also be used for outdoor signage and similar functions. One of its main advantages is that, because of its very high grab and opacity, it can be applied to walls which have low contamination, and has virtually no ‘see through’ once applied.


Key features

      • Printability: WP300 is printable across an extensive range of wide-format printing technology, including Latex, UV, solvent and eco-solvent inks. Best results are obtained with OEM inks.
      • Film thickness: 100mic +/- 5
      • Available width: 1370mm
      • Available lengths: 50m, 100m
      • 180° peel strength: > 22N/25mm after 24 hours on stainless steel
      • Boxed with suspension ends
      • Before use care must be taken to ensure the receiving surface is clean, dry and free from defects which could be detrimental to the performance of the laminate
      • Storage – when unused WP300 should be stored at temp 23°C +/- 2°C, RH < 55%
      • To prolong product life, avoid exposure to excessive ultraviolet radiation
      • Shelf life: 3 years when appropriately stored
      • Minimum expected ‘in use’ life: 4 years indoors, 3 years outdoors

For prices or to order, call the Perfect Colours sales team on 0845 680 9000.

Keep Reading


Lets talk!

We're here to help. Whether you're looking to get started with a large format printer or you've been in the industry for years, our team of qualified specialists are always happy to lend a hand. Give us a call on 0845 680 9000.

Our doors are open from 9am to 5.30pm Monday to Friday, but you can drop us an email at anytime and we'll get back to you as soon as we can.

Contact us